Guardrail system
BARRIER-FLEECE
The BARRIER FLEECE guardrail system is used wherever the fall edges of flat roofs up to 10° inclination must be protected. It creates a barrier to the fall edge, and so all persons located on the roof can move about in safety. This system is suitable only in combination with a green roof structure or a gravel fill, and was specially developed for this application area. Thanks to the green roof or gravel fill acting as a superimposed load, there is no need for additional weights on the roof, and so roof penetrations are a thing of the past.
- Efficient installation and few roof penetrations, thanks to post separations of 2,5 m.
- Optimum adaptability to the structure of the building, thanks to the surface coating options for the guardrail.
- Optimum use of the green roof s intrinsic weight, so there is no need for additional weights on the roof or for roof penetrations.
- Prevention of stumbling events, thanks to the boom s location beneath the roof system.
BARRIER-FLEECE - Technical data
The guardrail system consisting of aluminium and stainless steel impresses because of its weather resistance and
robustness.
The guardrail, together with the various individual components, such as the specially developed foot
units, posts, booms, and connectors, combine to create a harmonised system.
Because installation takes place
directly in combination with the green roof and the gravel fill, the roof is not subjected to an additional load.
Minimal roof loading
The guardrail system is installed in combination with the green roof structure or a
gravel fill. The weight of the existing roof thus provides the necessary
superimposed load for the system, and the need for an additional weight is
completely avoided.
Height adjustment and inclination option
Depending on the foot variant selected, a height adjustment of up to 12,5 cm is
possible. In addition, the guardrail can be inclined by 90° or 75°. For the optimum
visual result, there is also an option to fold up the guardrail and its respective foot.
Secured access
By fitting the optional BARRIER-T30 door set, optimally secured access and descent
to or from the flat roof are made possible.
State of the art certification:
EN 13374:2019
DIN EN 14122-3:2016
DIN 14094-2:2017
PRODUCT UPDATES
New economical variant with the BARRIER-V14 foot and an additional post with height adjustment up to 8 cm, and the option to incline the guardrail by 75°.
Downloads
Filter items
Items in this system
Components
BARRIER-Z11
Rating plate BARRIER-Z11 for guardrail system
The BARRIER guardrail system from INNOTECH provides many different application options in collective side protection.
BARRIER-S12-1500
Standard boom, superimposed load, BARRIER-S22-15
Standard boom, superimposed load.
BARRIER-V12
Vario foot unit BARRIER-V12
Vario foot unit for guardrail system.
BARRIER-V14
Vario foot unit BARRIER-V14
Vario foot unit for guardrail system.
BARRIER-V92
Vario corner tie BARRIER-V92
Corner tie.
BARRIER-F20
Toe board BARRIER-F20
Toe board for guardrail system.
BARRIER-F22
Toe board bracket BARRIER-F22
Toe board bracket for fastening to the VARIO foot unit.
BARRIER-F23
Toe board connection set BARRIER-F23
Toe board connection set.
BARRIER-F25
Toe board bracket BARRIER-F25
Toe board bracket for fastening to the VARIO foot unit.
BARRIER-S20-1140
Standard post BARRIER-S20-1140
Standard post VARIO, straight, permanent
BARRIER-S24-1140
Foldable post BARRIER-S24-1140
Foldable post
BARRIER-S25-1150
Curved post BARRIER-S25-1150
Curved post
BARRIER-T30
Door set BARRIER-T30
Door set.
BARRIER-R11
Aluminium pipe BARRIER-R11
Aluminium pipe.
BARRIER-R21
Linear tie BARRIER-R21
Linear tie.
BARRIER-R31
Corner tie BARRIER-R31
Corner tie.
BARRIER-R41
Wall tie BARRIER-R41
Wall tie.
BARRIER-R51
End seal BARRIER-R51
End seal.
BARRIER-R70
Pipe bracket BARRIER-R70
Pipe bracket.
BARRIER-R91
End cap BARRIER-R91
End cap for aluminium pipe.
BARRIER-Z22
End cap BARRIER-Z22
End cap.