Guardrail system
BARRIER-ATTIKA
The BARRIER PARAPET guardrail system is suitable only for combination with an existing parapet construction. Once the system has been attached to the parapet construction, it provides optimum fall protection for all persons located on the roof. There are many attachment options for the guardrail system, and so an optimum solution can be found for every situation. The BARRIER PARAPET’s various feet ensure an optimum visual result. For example, one of the feet also allows the system to be folded down completely, and then folded back up.
- Optimum result thanks to various installation options on the parapet (at the side and on top).
- No additional load on the structure of the flat roof, thanks to direct installation on the parapet.
- Visually matching overall appearance thanks to various models (also foldable if required).
- Efficient installation and few roof penetrations, thanks to post separations of 2,5 m.
BARRIER-ATTIKA - Technical data
The guardrail system consisting of aluminium and stainless steel impresses because of its weather resistance and
robustness. The guardrail, together with the various individual components, such as the specially developed foot
units and posts, combine to create a harmonised system. Because installation takes place directly on the parapet,
the roof is not subjected to an additional load.
Optimum result
There are various options for installing the guardrail system, such as installation on
the side or top of the parapet. It is thus possible to achieve an optimum visual
result appropriate to the actual circumstances.
Reduction of installation effort
From a financial aspect, the wide post separations of 2,5 m have a positive effect
on the overall installation process.
Secured access
By fitting the optional BARRIER-T30 door set, optimally secured access and descent
to or from the flat roof are made possible.
State of the art certification:
EN 13374:2019
DIN EN 14122-3:2016
DIN 14094-2:2017
Downloads
Filter items
Items in this system
Components
BARRIER-Z11
Rating plate BARRIER-Z11 for guardrail system
The BARRIER guardrail system from INNOTECH provides many different application options in collective side protection.
BARRIER-A22
Adapter BARRIER-A22
Adapter for attachment to the top of the parapet.
BARRIER-F20
Toe board BARRIER-F20
Toe board for guardrail system.
BARRIER-F21
Toe board bracket BARRIER-F21
Toe board bracket for fastening the toe board to the post.
BARRIER-F23
Toe board connection set BARRIER-F23
Toe board connection set.
BARRIER-S21-1050
Standard post, parapet, BARRIER-S21-1050
Standard post, parapet, straight, permanent.
BARRIER-T30
Door set BARRIER-T30
Door set.
BARRIER-R11
Aluminium pipe BARRIER-R11
Aluminium pipe.
BARRIER-R21
Linear tie BARRIER-R21
Linear tie.
BARRIER-R31
Corner tie BARRIER-R31
Corner tie.
BARRIER-R41
Wall tie BARRIER-R41
Wall tie.
BARRIER-R51
End seal BARRIER-R51
End seal.
BARRIER-R70
Pipe bracket BARRIER-R70
Pipe bracket.
BARRIER-R91
End cap BARRIER-R91
End cap for aluminium pipe.
Accessory items
BARRIER-A10
Adapter BARRIER-A10
Adapter on the side of the parapet.
BARRIER-A11
Adapter BARRIER-A11
Adapter on the inside of the parapet, hinged.
BARRIER-A31
Spacer bracket BARRIER-A31
Spacer bracket for parapet guardrail system.